- Hammer drilling, 22 to 150 mm dia.
- Drilling holes for heavy-duty anchors, 20 to 40 mm dia.
- Penetrations up to 80 mm dia.
- Breaching and demolition with pointed and flat chisels
- Working with wide-flat, hollow, mortar or channel chisels and bushing tools
- Drilling with high torque in wood and steel
Features and benerfits:
- 380 r.p.m for extra drilling performance (std. in this class: approx. 280 r.p.m)
- Optimized mechanical clutch for maximum torque transfer
- Less tiring to use as less contact pressure is required
- Center of gravity close to the grip for optimum balance
- Glass-fiber reinforced housing parts for ruggedness and long life
Technical Data:
| Rated input | 1600 W |
| Single impact energy | 11 J |
| Full hammering frequency | 2760 impacts/minute |
| Chuck type | TE-Y |
| Weight according EPTA-Procedure 01/2003 | 8.9 kg |
| Dimensions (LxWxH) | 524 x 123 x 294 mm |
| Triaxial vibration value for hammer drilling into concrete ( | 22 m/s² |
| Triaxial vibration for chiseling in concrete | 18 m/s² |
| Uncertainty (K) for triaxial vibration value for chiseling ( | 1.5 m/s² |
| Number of gears | 1 |
| Rotation speed gear 1 under no load | 250 rpm |
| Rotation speed gear 2 under no load | 360 rpm |
| Optimum drilling diameter in concrete | 22 mm - 40 mm |
| Drilling Performance | 140 cm³/min @ Ø 20 mm 169.76 cm³/min @ Ø 25 mm 190.51 cm³/min @ Ø 32 mm |
| Variable speed switch | Yes |
| Service indicator | Yes |
| AVR - Active Vibration Reduction | No |
| Active Torque Control | Yes |
Features and benerfits:
Không có nhận xét nào:
Đăng nhận xét